Kubernetes指南從零開始搭建集群

Kubernetes指南: 從零開始搭建集群

成都創新互聯主要從事成都網站建設、做網站、網頁設計、企業做網站、公司建網站等業務。立足成都服務玉泉,十余年網站建設經驗,價格優惠、服務專業,歡迎來電咨詢建站服務:13518219792

在云計算時代，容器化已經成為了一種廣泛使用的技術，Kubernetes是其中的佼佼者，其作為一個容器編排平臺，在管理上的優勢及其高可用性、易擴展性深受企業和開發者的喜愛。在本文章中，我們將從零開始搭建Kubernetes集群，并解釋其中的技術知識點。

1. 環境準備

在開始之前，需要先確定好環境，Kubernetes分為Master節點和Worker節點，其中Master節點需要至少2個，Worker節點至少1個，硬件環境和軟件環境需要滿足一定的要求。硬件環境建議：

- Master節點：CPU 2核，內存 2GB，硬盤 40GB以上

- Worker節點：CPU 4核，內存 4GB，硬盤 40GB以上

軟件環境建議：

- 操作系統：CentOS7.4以上

- Docker：18.09.0以上

- Kubeadm：1.20.1及以上

2. 安裝Docker

在CentOS系統下，我們可以執行下方腳本安裝Docker：

`bash

$ sudo yum install -y yum-utils device-mapper-persistent-data lvm2

$ sudo yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo

$ sudo yum install -y docker-ce-18.09.0 docker-ce-cli-18.09.0 containerd.io

$ sudo systemctl start docker

$ sudo systemctl enable docker

3. 安裝Kubeadm我們可以執行如下腳本安裝Kubeadm：`bash$ sudo vi /etc/sysctl.d/k8s.conf # 寫入如下內容net.bridge.bridge-nf-call-ip6tables = 1net.bridge.bridge-nf-call-iptables = 1$ sudo sysctl --system$ sudo setenforce 0$ sudo sed -i 's/SELINUX=enforcing/SELINUX=permissive/' /etc/selinux/config $ sudo vi /etc/yum.repos.d/kubernetes.repo# 寫入如下內容[kubernetes]name=Kubernetesbaseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/enabled=1gpgcheck=0repo_gpgcheck=0gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg$ sudo yum install -y kubelet-1.20.1 kubeadm-1.20.1 kubectl-1.20.1 --disableexcludes=kubernetes$ sudo systemctl enable kubelet$ sudo systemctl start kubelet

4. 搭建Master節點

在搭建Master節點時，我們需要先確定好IP地址，并編輯好如下配置文件：

`yaml

apiVersion: kubeadm.k8s.io/v1beta2

kind: ClusterConfiguration

kubernetesVersion: stable

apiServer:

certSANs:

- "{{ Master節點IP地址 }}"

controlPlaneEndpoint: "{{ Master節點IP地址 }}:6443"

extraArgs:

audit-log-path: /var/log/kubernetes/audit.log

audit-log-maxage: "30"

audit-log-maxbackup: "3"

audit-log-maxsize: "100"

authorization-mode: Node,RBAC

enable-admission-plugins: NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota

runtime-config: api/all=true

service-node-port-range: 30000-32767

controllerManager:

extraArgs:

node-cidr-mask-size: "24"

node-monitor-grace-period: "30s"

pod-eviction-timeout: "2m"

use-service-account-credentials: "true"

networking:

dnsDomain: cluster.local

podSubnet: "10.244.0.0/16"

serviceSubnet: "10.96.0.0/12"

然后，我們?cè)贛aster節點上執行如下腳本：`bash$ sudo kubeadm init --config kubeadm-config.yaml

在執行完成后，我們可以看到如下輸出：

`bash

[init] Using Kubernetes version: v1.20.0

[preflight] Running pre-flight checks

[WARNING FileExisting-crictl]: crictl not found in system path

[preflight] Pulling images required for setting up a Kubernetes cluster

[preflight] This might take a minute or two, depending on the speed of your internet connection

[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'

[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"

[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"

[kubelet-start] Starting the kubelet

[certs] Using certificateDir folder "/etc/kubernetes/pki"

[certs] Generating "ca" certificate and key

[certs] Generating "apiserver" certificate and key

[certs] apiserver serving cert is signed for DNS names [master-1 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.1.120]

[certs] Generating "apiserver-kubelet-client" certificate and key

[certs] Generating "front-proxy-ca" certificate and key

[certs] Generating "front-proxy-client" certificate and key

[certs] Generating "etcd/ca" certificate and key

[certs] Generating "etcd/server" certificate and key

[certs] etcd/server serving cert is signed for DNS names [localhost] and IPs [192.168.1.120 127.0.0.1 ::1]

[certs] Generating "etcd/peer" certificate and key

[certs] etcd/peer serving cert is signed for DNS names [localhost] and IPs [192.168.1.120 127.0.0.1 ::1]

[certs] Generating "etcd/healthcheck-client" certificate and key

[certs] Generating "apiserver-etcd-client" certificate and key

[certs] Generating "sa" key and public key

[kubeconfig] Using kubeconfig folder "/etc/kubernetes"

[kubeconfig] Writing "admin.conf" kubeconfig file

[kubeconfig] Writing "kubelet.conf" kubeconfig file

[kubeconfig] Writing "controller-manager.conf" kubeconfig file

[kubeconfig] Writing "scheduler.conf" kubeconfig file

[control-plane] Using manifest folder "/etc/kubernetes/manifests"

[control-plane] Creating static Pod manifest for "kube-apiserver"

[control-plane] Creating static Pod manifest for "kube-controller-manager"

[control-plane] Creating static Pod manifest for "kube-scheduler"

[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"

[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s

[kubelet-check] Initial timeout of 40s passed.

[apiclient] All control plane components are healthy after 80.001069 seconds

[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace

[kubelet] Creating a ConfigMap "kubelet-config-1.20" in namespace kube-system with the configuration for the kubelets in the cluster

[kubelet-start] Restarting the kubelet to use the new kubelet configuration

[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials

[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token

[csr-approver] CSR approval is disabled. Nodes that match this CSR will be not be permitted to join the cluster. Passing --apiserver-advertise-address=0.0.0.0 may allow unauthorized nodes to join the cluster.

[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster

[addons] Applied essential addon: CoreDNS

[addons] Applied essential addon: kube-proxy

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

mkdir -p $HOME/.kube

sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config

sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

export KUBECONFIG=/etc/kubernetes/admin.conf

You should now deploy a pod network to the cluster.

Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:

https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join {{ Master節點IP地址 }}:6443 --token {{ Token }} \

--discovery-token-ca-cert-hash sha256:{{ CA證書哈希值 }}

在執行完成后，我們需要執行如下腳本，讓普通用戶也擁有使用Kubernetes的權限：`bash$ mkdir -p $HOME/.kube$ sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config$ sudo chown $(id -u):$(id -g) $HOME/.kube/config

5. 搭建Worker節點

在搭建Worker節點時，我們需要使用之前Master節點輸出的join命令，并將其執行在Worker節點上，如下：

`bash

$ sudo kubeadm join {{ Master節點IP地址 }}:6443 --token {{ Token }} \

--discovery-token-ca-cert-hash sha256:{{ CA證書哈希值 }}

執行成功后，在Master節點上執行如下腳本：`bash$ kubectl get nodes

如果輸出了剛剛加入的Worker節點信息，說明Worker節點已經成功加入到了集群中。

至此，我們已經成功搭建了一個Kubernetes集群，并且已經加入了一個Worker節點。在實際生產環境中，我們還需要進行更多的配置和優化，例如網絡、存儲、高可用性等方面，這將在后續的文章中進行探討。

網頁標題：Kubernetes指南從零開始搭建集群
標題網址：http://www.muchs.cn/article18/dgphegp.html

成都網站建設公司_創新互聯，為您提供網站設計公司、網站改版、標簽優化、微信公眾號、商城網站、網站維護

廣告

聲明：本網站發布的內容（圖片、視頻和文字）以用戶投稿、用戶轉載內容為主，如果涉及侵權請盡快告知，我們將會在第一時間刪除。文章觀點不代表本網站立場，如需處理請聯系客服。電話：028-86922220；郵箱：631063699@qq.com。內容未經允許不得轉載，或轉載時需注明來源： 創新互聯