PHPSwoole長連接常見問題有哪些
PHP Swoole長連接常見問題有哪些，相信很多沒有經驗的人對此束手無策，為此本文總結了問題出現的原因和解決方法，通過這篇文章希望你能解決這個問題。
創新互聯公司主營南譙網站建設的網絡公司,主營網站建設方案,成都app軟件開發公司,南譙h5成都微信小程序搭建,南譙網站營銷推廣歡迎南譙等地區企業咨詢
連接失效問題
例子
其中，redis常見的報錯就是：
配置項：timeout
報錯信息：Error while reading line from the server
Redis可以配置如果客戶端經過多少秒還不給Redis服務器發送數據，那么就會把連接close掉。
推薦學習： swoole教程
MySQL常見的報錯：
配置項：wait_timeout & interactive_timeout
報錯信息：has gone away
和Redis服務器一樣，MySQL也會定時的去清理掉沒用的連接。
如何解決
1、用的時候進行重連
2、定時發送心跳維持連接
用的時候進行重連
優點是簡單，缺點是面臨短連接的問題。
定時發送心跳維持連接
推薦。
如何維持長連接
tcp協議中實現的tcp_keepalive
操作系統底層提供了一組tcp的keepalive配置：
tcp_keepalive_time (integer; default: 7200; since Linux 2.2) The number of seconds a connection needs to be idle before TCP begins sending out keep-alive probes. Keep-alives are sent only when the SO_KEEPALIVE socket option is enabled. The default value is 7200 seconds (2 hours). An idle connection is terminated after approximately an additional 11 minutes (9 probes an interval of 75 seconds apart) when keep-alive is enabled. Note that underlying connection tracking mechanisms and application timeouts may be much shorter. tcp_keepalive_intvl (integer; default: 75; since Linux 2.4) The number of seconds between TCP keep-alive probes. tcp_keepalive_probes (integer; default: 9; since Linux 2.2) The maximum number of TCP keep-alive probes to send before giving up and killing the connection if no response is obtained from the other end. 8
Swoole底層把這些配置開放出來了，例如：
?php
$server = new \Swoole\Server('127.0.0.1', 6666, SWOOLE_PROCESS);
$server->set([
'worker_num' => 1,
'open_tcp_keepalive' => 1,
'tcp_keepidle' => 4, // 對應tcp_keepalive_time
'tcp_keepinterval' => 1, // 對應tcp_keepalive_intvl
'tcp_keepcount' => 5, // 對應tcp_keepalive_probes
]);其中：
'open_tcp_keepalive' => 1, // 總開關，用來開啟tcp_keepalive 'tcp_keepidle' => 4, // 4s沒有數據傳輸就進行檢測 // 檢測的策略如下： 'tcp_keepinterval' => 1, // 1s探測一次，即每隔1s給客戶端發一個包（然后客戶端可能會回一個ack的包，如果服務端收到了這個ack包，那么說明這個連接是活著的） 'tcp_keepcount' => 5, // 探測的次數，超過5次后客戶端還沒有回ack包，那么close此連接
我們來實戰測試體驗一下，服務端腳本如下：
<?php
$server = new \Swoole\Server('127.0.0.1', 6666, SWOOLE_PROCESS);
$server->set([
'worker_num' => 1,
'open_tcp_keepalive' => 1, // 開啟tcp_keepalive
'tcp_keepidle' => 4, // 4s沒有數據傳輸就進行檢測
'tcp_keepinterval' => 1, // 1s探測一次
'tcp_keepcount' => 5, // 探測的次數，超過5次后還沒有回包c(diǎn)lose此連接
]);
$server->on('connect', function ($server, $fd) {
var_dump("Client: Connect $fd");
});
$server->on('receive', function ($server, $fd, $reactor_id, $data) {
var_dump($data);
});
$server->on('close', function ($server, $fd) {
var_dump("close fd $fd");
});
$server->start();我們啟動這個服務器：
~/codeDir/phpCode/hyperf-skeleton # php server.php
然后通過tcpdump進行抓包：
~/codeDir/phpCode/hyperf-skeleton # tcpdump -i lo port 6666
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on lo, link-type EN10MB (Ethernet), capture size 262144 bytes
我們此時正在監聽lo上的6666端口的數據包。
然后我們用客戶端去連接它：
~/codeDir/phpCode/hyperf-skeleton # nc 127.0.0.1 6666
此時服務端會打印出消息：
~/codeDir/phpCode/hyperf-skeleton # php server.php string(17) "Client: Connect 1"
tcpdump的輸出信息如下：
01:48:40.178439 IP localhost.33933 > localhost.6666: Flags [S], seq 43162537, win 43690, options [mss 65495,sackOK,TS val 9833698 ecr 0,nop,wscale 7], length 0 01:48:40.178484 IP localhost.6666 > localhost.33933: Flags [S.], seq 1327460565, ack 43162538, win 43690, options [mss 65495,sackOK,TS val 9833698 ecr 9833698,nop,wscale 7], length 0 01:48:40.178519 IP localhost.33933 > localhost.6666: Flags [.], ack 1, win 342, options [nop,nop,TS val 9833698 ecr 9833698], length 0 01:48:44.229926 IP localhost.6666 > localhost.33933: Flags [.], ack 1, win 342, options [nop,nop,TS val 9834104 ecr 9833698], length 0 01:48:44.229951 IP localhost.33933 > localhost.6666: Flags [.], ack 1, win 342, options [nop,nop,TS val 9834104 ecr 9833698], length 0 01:48:44.229926 IP localhost.6666 > localhost.33933: Flags [.], ack 1, win 342, options [nop,nop,TS val 9834104 ecr 9833698], length 0 01:48:44.229951 IP localhost.33933 > localhost.6666: Flags [.], ack 1, win 342, options [nop,nop,TS val 9834104 ecr 9833698], length 0 01:48:44.229926 IP localhost.6666 > localhost.33933: Flags [.], ack 1, win 342, options [nop,nop,TS val 9834104 ecr 9833698], length 0 // 省略了其他的輸出
我們會發現最開始的時候，會打印三次握手的包：
01:48:40.178439 IP localhost.33933 > localhost.6666: Flags [S], seq 43162537, win 43690, options [mss 65495,sackOK,TS val 9833698 ecr 0,nop,wscale 7], length 0 01:48:40.178484 IP localhost.6666 > localhost.33933: Flags [S.], seq 1327460565, ack 43162538, win 43690, options [mss 65495,sackOK,TS val 9833698 ecr 9833698,nop,wscale 7], length 0 01:48:40.178519 IP localhost.33933 > localhost.6666: Flags [.], ack 1, win 342, options [nop,nop,TS val 9833698 ecr 9833698], length 0
然后，停留了4s沒有任何包的輸出。
之后，每隔1s左右就會打印出一組：
01:52:54.359341 IP localhost.6666 > localhost.43101: Flags [.], ack 1, win 342, options [nop,nop,TS val 9859144 ecr 9858736], length 0 01:52:54.359377 IP localhost.43101 > localhost.6666: Flags [.], ack 1, win 342, options [nop,nop,TS val 9859144 ecr 9855887], length 0
其實這就是我們配置的策略：
'tcp_keepinterval' => 1, // 1s探測一次 'tcp_keepcount' => 5, // 探測的次數，超過5次后還沒有回包c(diǎn)lose此連接
因?yàn)槲覀儾僮飨到y(tǒng)底層會自動的給客戶端回ack，所以這個連接不會在5次探測后被關閉。操作系統底層會持續不斷的發送這樣的一組包：
01:52:54.359341 IP localhost.6666 > localhost.43101: Flags [.], ack 1, win 342, options [nop,nop,TS val 9859144 ecr 9858736], length 0 01:52:54.359377 IP localhost.43101 > localhost.6666: Flags [.], ack 1, win 342, options [nop,nop,TS val 9859144 ecr 9855887], length 0
如果我們要測試5次探測后關閉這個連接，可以禁掉6666端口的包：
~/codeDir/phpCode/hyperf-skeleton # iptables -A INPUT -p tcp --dport 6666 -j DROP
這樣會把所有從6666端口進來的包給禁掉，自然，服務器就接收不到從客戶端那一邊發來的ack包了。
然后服務器過5秒就會打印出close（服務端主動的調用了close方法，給客戶端發送了FIN包）：
~/codeDir/phpCode/hyperf-skeleton # php server.php string(17) "Client: Connect 1" string(10) "close fd 1"
我們恢復一下iptables的規則：
~/codeDir/phpCode # iptables -D INPUT -p tcp -m tcp --dport 6666 -j DROP
即把我們?cè)O(shè)置的規則給刪除了。
通過tcp_keepalive的方式實現心跳的功能，優點是簡單，不要寫代碼就可以完成這個功能，并且發送的心跳包小。缺點是依賴于系統的網絡環境，必須保證服務器和客戶端都實現了這樣的功能，需要客戶端配合發心跳包。
還有一個更為嚴重的缺點是如果客戶端和服務器不是直連的，而是通過代理來進行連接的，例如socks5代理，它只會轉發應用層的包，不會轉發更為底層的tcp探測包，那這個心跳功能就失效了。
所以，Swoole就提供了其他的解決方案，一組檢測死連接的配置。
'heartbeat_check_interval' => 1, // 1s探測一次 'heartbeat_idle_time' => 5, // 5s未發送數據包就close此連接
swoole實現的heartbeat
我們來測試一下：
<?php
$server = new \Swoole\Server('127.0.0.1', 6666, SWOOLE_PROCESS);
$server->set([
'worker_num' => 1,
'heartbeat_check_interval' => 1, // 1s探測一次
'heartbeat_idle_time' => 5, // 5s未發送數據包就close此連接
]);
$server->on('connect', function ($server, $fd) {
var_dump("Client: Connect $fd");
});
$server->on('receive', function ($server, $fd, $reactor_id, $data) {
var_dump($data);
});
$server->on('close', function ($server, $fd) {
var_dump("close fd $fd");
});
$server->start();然后啟動服務器：
~/codeDir/phpCode/hyperf-skeleton # php server.php
然后啟動tcpdump：
~/codeDir/phpCode # tcpdump -i lo port 6666 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on lo, link-type EN10MB (Ethernet), capture size 262144 bytes
然后再啟動客戶端：
~/codeDir/phpCode/hyperf-skeleton # nc 127.0.0.1 6666
此時服務器端打?。?/p>
~/codeDir/phpCode/hyperf-skeleton # php server.php string(17) "Client: Connect 1"
然后tcpdump打?。?/p>
02:48:32.516093 IP localhost.42123 > localhost.6666: Flags [S], seq 1088388248, win 43690, options [mss 65495,sackOK,TS val 10193342 ecr 0,nop,wscale 7], length 0 02:48:32.516133 IP localhost.6666 > localhost.42123: Flags [S.], seq 80508236, ack 1088388249, win 43690, options [mss 65495,sackOK,TS val 10193342 ecr 10193342,nop,wscale 7], length 0 02:48:32.516156 IP localhost.42123 > localhost.6666: Flags [.], ack 1, win 342, options [nop,nop,TS val 10193342 ecr 10193342], length 0
這是三次握手信息。
然后過了5s后，tcpdump會打印出：
02:48:36.985027 IP localhost.6666 > localhost.42123: Flags [F.], seq 1, ack 1, win 342, options [nop,nop,TS val 10193789 ecr 10193342], length 0
02:48:36.992172 IP localhost.42123 > localhost.6666: Flags [.], ack 2, win 342, options [nop,nop,TS val 10193790 ecr 10193789], length 0
也就是服務端發送了FIN包。因?yàn)榭蛻舳藳](méi)有發送數據，所以Swoole關閉了連接。
然后服務器端會打?。?/p>
~/codeDir/phpCode/hyperf-skeleton # php server.php string(17) "Client: Connect 1" string(10) "close fd 1"
所以，heartbeat和tcp keepalive還是有一定的區別的，tcp keepalive有?；钸B接的功能，但是heartbeat存粹是檢測沒有數據的連接，然后關閉它，并且只可以在服務端這邊配置，如果需要保活，也可以讓客戶端配合發送心跳。
如果我們不想讓服務端close掉連接，那么就得在應用層里面不斷的發送數據包來進行?；?，例如我在nc客戶端里面不斷的發送包：
~/codeDir/phpCode/hyperf-skeleton # nc 127.0.0.1 6666 ping ping ping ping ping ping ping ping ping
我發送了9個ping包給服務器，tcpdump的輸出如下：
// 省略了三次握手的包 02:57:53.697363 IP localhost.44195 > localhost.6666: Flags [P.], seq 1:6, ack 1, win 342, options [nop,nop,TS val 10249525 ecr 10249307], length 5 02:57:53.697390 IP localhost.6666 > localhost.44195: Flags [.], ack 6, win 342, options [nop,nop,TS val 10249525 ecr 10249525], length 0 02:57:55.309532 IP localhost.44195 > localhost.6666: Flags [P.], seq 6:11, ack 1, win 342, options [nop,nop,TS val 10249686 ecr 10249525], length 5 02:57:55.309576 IP localhost.6666 > localhost.44195: Flags [.], ack 11, win 342, options [nop,nop,TS val 10249686 ecr 10249686], length 0 02:57:58.395206 IP localhost.44195 > localhost.6666: Flags [P.], seq 11:16, ack 1, win 342, options [nop,nop,TS val 10249994 ecr 10249686], length 5 02:57:58.395239 IP localhost.6666 > localhost.44195: Flags [.], ack 16, win 342, options [nop,nop,TS val 10249994 ecr 10249994], length 0 02:58:01.858094 IP localhost.44195 > localhost.6666: Flags [P.], seq 16:21, ack 1, win 342, options [nop,nop,TS val 10250341 ecr 10249994], length 5 02:58:01.858126 IP localhost.6666 > localhost.44195: Flags [.], ack 21, win 342, options [nop,nop,TS val 10250341 ecr 10250341], length 0 02:58:04.132584 IP localhost.44195 > localhost.6666: Flags [P.], seq 21:26, ack 1, win 342, options [nop,nop,TS val 10250568 ecr 10250341], length 5 02:58:04.132609 IP localhost.6666 > localhost.44195: Flags [.], ack 26, win 342, options [nop,nop,TS val 10250568 ecr 10250568], length 0 02:58:05.895704 IP localhost.44195 > localhost.6666: Flags [P.], seq 26:31, ack 1, win 342, options [nop,nop,TS val 10250744 ecr 10250568], length 5 02:58:05.895728 IP localhost.6666 > localhost.44195: Flags [.], ack 31, win 342, options [nop,nop,TS val 10250744 ecr 10250744], length 0 02:58:07.150265 IP localhost.44195 > localhost.6666: Flags [P.], seq 31:36, ack 1, win 342, options [nop,nop,TS val 10250870 ecr 10250744], length 5 02:58:07.150288 IP localhost.6666 > localhost.44195: Flags [.], ack 36, win 342, options [nop,nop,TS val 10250870 ecr 10250870], length 0 02:58:08.349124 IP localhost.44195 > localhost.6666: Flags [P.], seq 36:41, ack 1, win 342, options [nop,nop,TS val 10250990 ecr 10250870], length 5 02:58:08.349156 IP localhost.6666 > localhost.44195: Flags [.], ack 41, win 342, options [nop,nop,TS val 10250990 ecr 10250990], length 0 02:58:09.906223 IP localhost.44195 > localhost.6666: Flags [P.], seq 41:46, ack 1, win 342, options [nop,nop,TS val 10251145 ecr 10250990], length 5 02:58:09.906247 IP localhost.6666 > localhost.44195: Flags [.], ack 46, win 342, options [nop,nop,TS val 10251145 ecr 10251145], length 0
有9組數據包的發送。（這里的Flags [P.]代表Push的含義）
此時服務器還沒有close掉連接，實現了客戶端?；钸B接的功能。然后我們停止發送ping，過了5秒后tcpdump就會輸出一組：
02:58:14.811761 IP localhost.6666 > localhost.44195: Flags [F.], seq 1, ack 46, win 342, options [nop,nop,TS val 10251636 ecr 10251145], length 0
02:58:14.816420 IP localhost.44195 > localhost.6666: Flags [.], ack 2, win 342, options [nop,nop,TS val 10251637 ecr 10251636], length 0
服務端那邊發送了FIN包，說明服務端close掉了連接。服務端的輸出如下：
~/codeDir/phpCode/hyperf-skeleton # php server.php string(17) "Client: Connect 1" string(5) "ping " string(5) "ping " string(5) "ping " string(5) "ping " string(5) "ping " string(5) "ping " string(5) "ping " string(5) "ping " string(5) "ping " string(10) "close fd 1"
然后我們?cè)诳蛻舳四沁卌trl + c來關閉連接：
~/codeDir/phpCode/hyperf-skeleton # nc 127.0.0.1 6666 ping ping ping ping ping ping ping ping ping ^Cpunt! ~/codeDir/phpCode/hyperf-skeleton #
此時，tcpdump的輸出如下：
03:03:02.257667 IP localhost.44195 > localhost.6666: Flags [F.], seq 46, ack 2, win 342, options [nop,nop,TS val 10280414 ecr 10251636], length 0 03:03:02.257734 IP localhost.6666 > localhost.44195: Flags [R], seq 2678621620, win 0, length 0
應用層心跳
1、制定ping/pong協議（mysql等自帶ping協議）
2、客戶端靈活的發送ping心跳包
3、服務端OnRecive檢查可用性回復pong
例如：
$server->on('receive', function (\Swoole\Server $server, $fd, $reactor_id, $data)
{
if ($data == 'ping')
{
checkDB();
checkServiceA();
checkRedis();
$server->send('pong');
}
});結論
1、tcp的keepalive最簡單，但是有兼容性問題，不夠靈活
2、swoole提供的keepalive最實用，但是需要客戶端配合，復雜度適中
3、應用層的keepalive最靈活但是最麻煩
看完上述內容，你們掌握PHP Swoole長連接常見問題有哪些的方法了嗎？如果還想學到更多技能或想了解更多相關內容，歡迎關注創新互聯行業資訊頻道，感謝各位的閱讀！
分享標題：PHPSwoole長連接常見問題有哪些
文章源于：http://muchs.cn/article42/phocec.html
成都網站建設公司_創新互聯，為您提供手機網站建設、搜索引擎優化、網站改版、關鍵詞優化、移動網站建設、企業建站
聲明：本網站發布的內容（圖片、視頻和文字）以用戶投稿、用戶轉載內容為主，如果涉及侵權請盡快告知，我們將會在第一時間刪除。文章觀點不代表本網站立場，如需處理請聯系客服。電話：028-86922220；郵箱：631063699@qq.com。內容未經允許不得轉載，或轉載時需注明來源： 創新互聯
- 企業小程序開發方式有哪幾種？ 2015-09-14
- 了解什么是網站維護 2021-01-09
- 你身邊存在多少小程序你知道嗎？ 2016-08-07
- 網站制作價格大概分為幾個檔次，分別是多少錢 2014-09-19
- APP開發怎么收費？ 2016-08-17
- 做好網站維護的四點建議 2022-11-16
- 物聯網為軟件開發帶來的7大啟示！ 2016-08-29
- 青島網站維護：建站后必須要做好這些維護工作！ 2021-12-24
- 建設手機網站有幾個方面的優點 2015-12-29
- 網站維護對網站的好處有哪些？ 2022-07-11
- 手機移動版網站應該符合哪些標準 2016-10-07
- 網站備份搬家 2022-05-25