這篇文章給大家分享的是有關超級實用的iptables防火墻腳本怎么用的內容。小編覺得挺實用的,因此分享給大家做個參考,一起跟隨小編過來看看吧。
作為一家“創意+整合+營銷”的成都網站建設機構,我們?cè)跇I(yè)內良好的客戶口碑。創新互聯建站提供從前期的網站品牌分析策劃、網站設計、做網站、網站建設、創意表現、網頁制作、系統開發以及后續網站營銷運營等一系列服務,幫助企業打造創新的互聯網品牌經營模式與有效的網絡營銷方法,創造更大的價值。創建 iptables.sh 腳本
[root@Jaking ~]# vim iptables.sh #!/bin/bash #清空 filter 表和 nat 表 iptables -F iptables -t nat -F #關掉 firewalld systemctl stop firewalld &>/dev/null systemctl disable firewalld &>/dev/null #以下兩行允許某些調用 localhost 的應用訪問 iptables -A INPUT -i lo -j ACCEPT #規則1 iptables -A INPUT -s 127.0.0.1 -d 127.0.0.1 -j ACCEPT #規則2 #以下一行允許從其他地方 ping iptables -A INPUT -p icmp --icmp-type echo-request -j ACCEPT #規則3 #以下一行允許從其他主機、網絡設備發送 MTU 調整的報文 #在一些情況下,例如通過 IPSec VPN 隧道時,主機的 MTU 需要?jiǎng)討B(tài)減小 iptables -A INPUT -p icmp --icmp-type fragmentation-needed -j ACCEPT #規則4 #以下兩行分別允許所有來源訪問 TCP 80,443 端口 iptables -A INPUT -p tcp --dport 80 -j ACCEPT #規則5 iptables -A INPUT -p tcp --dport 443 -j ACCEPT #規則6 #以下一行允許所有來源訪問 UDP 80,443 端口 iptables -A INPUT -p udp -m multiport --dports 80,443 -j ACCEPT #規則7 #以下一行允許 192.168.1.63 來源的 IP 訪問 TCP 22 端口(OpenSSH) iptables -A INPUT -p tcp -s 192.168.1.63 --dport 22 -j ACCEPT #規則8 #以下一行允許 192.168.1.3(發起SSH連接的系統對應網卡的IP) 來源的 IP 訪問 TCP 22 端口(OpenSSH) #如果是在遠程終端跑本腳本,最好開啟以下一行以防被踢掉 #另一種更加簡便的方式:iptables -I INPUT -p tcp --dport 22 -j ACCEPT iptables -A INPUT -p tcp -s 192.168.1.3 --dport 22 -j ACCEPT #規則9 #以下一行允許 192.168.1.26 來源的 IP 訪問 UDP 161 端口(SNMP) iptables -A INPUT -p udp -s 192.168.1.26 --dport 161 -j ACCEPT #規則10 #配置 NAT #啟用內核路由轉發功能 echo 1 > /proc/sys/net/ipv4/ip_forward echo "net.ipv4.ip_forward = 1" > /etc/sysctl.conf sysctl -p &>/dev/null #配置源地址轉換 SNAT #將 192.168.2.0/24 轉換成 192.168.1.63 iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -j SNAT --to 192.168.1.63 #規則11 #配置目的地址轉換 DNAT #將 192.168.1.63 的 80 端口請求轉發到 192.168.2.2 的 80 端口 iptables -t nat -A PREROUTING -d 192.168.1.63 -p tcp --dport 80 -j DNAT --to 192.168.2.2:80 #規則12 #以下一行禁止所有其他的進入流量 iptables -A INPUT -j DROP #規則13 #以下一行允許本機響應規則編號為 1-12 的數據包發出 iptables -A OUTPUT -m state --state ESTABLISHED -j ACCEPT #規則14 #以下一行禁止本機主動發出外部連接 iptables -A OUTPUT -j DROP #規則15 #以下一行禁止本機轉發數據包 iptables -A FORWARD -j DROP #規則16 #固化 iptables iptables-save > /etc/sysconfig/iptables [root@Jaking ~]# chmod 755 iptables.sh
測試
[root@Jaking ~]# ./iptables.sh [root@Jaking ~]# [root@Jaking ~]# [root@Jaking ~]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- localhost localhost ACCEPT icmp -- anywhere anywhere icmp echo-request ACCEPT icmp -- anywhere anywhere icmp fragmentation-needed ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT udp -- anywhere anywhere multiport dports http,https ACCEPT tcp -- 192.168.1.63 anywhere tcp dpt:ssh ACCEPT tcp -- 192.168.1.3 anywhere tcp dpt:ssh ACCEPT udp -- 192.168.1.26 anywhere udp dpt:snmp DROP all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination DROP all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state ESTABLISHED DROP all -- anywhere anywhere [root@Jaking ~]# iptables -L --line-number Chain INPUT (policy ACCEPT) num target prot opt source destination 1 ACCEPT all -- anywhere anywhere 2 ACCEPT all -- localhost localhost 3 ACCEPT icmp -- anywhere anywhere icmp echo-request 4 ACCEPT icmp -- anywhere anywhere icmp fragmentation-needed 5 ACCEPT tcp -- anywhere anywhere tcp dpt:http 6 ACCEPT tcp -- anywhere anywhere tcp dpt:https 7 ACCEPT udp -- anywhere anywhere multiport dports http,https 8 ACCEPT tcp -- 192.168.1.63 anywhere tcp dpt:ssh 9 ACCEPT tcp -- 192.168.1.3 anywhere tcp dpt:ssh 10 ACCEPT udp -- 192.168.1.26 anywhere udp dpt:snmp 11 DROP all -- anywhere anywhere Chain FORWARD (policy ACCEPT) num target prot opt source destination 1 DROP all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) num target prot opt source destination 1 ACCEPT all -- anywhere anywhere state ESTABLISHED 2 DROP all -- anywhere anywhere [root@Jaking ~]# iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination DNAT tcp -- anywhere 192.168.1.63 tcp dpt:http to:192.168.2.2:80 Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination SNAT all -- 192.168.2.0/24 anywhere to:192.168.1.63 [root@Jaking ~]# iptables -t nat -L --line-number Chain PREROUTING (policy ACCEPT) num target prot opt source destination 1 DNAT tcp -- anywhere 192.168.1.63 tcp dpt:http to:192.168.2.2:80 Chain INPUT (policy ACCEPT) num target prot opt source destination Chain OUTPUT (policy ACCEPT) num target prot opt source destination Chain POSTROUTING (policy ACCEPT) num target prot opt source destination 1 SNAT all -- 192.168.2.0/24 anywhere to:192.168.1.63
iptables 的清空和恢復
[root@Jaking ~]# iptables -F [root@Jaking ~]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination [root@Jaking ~]# iptables -t nat -F [root@Jaking ~]# iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination [root@Jaking ~]# iptables-restore < /etc/sysconfig/iptables [root@Jaking ~]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- localhost localhost ACCEPT icmp -- anywhere anywhere icmp echo-request ACCEPT icmp -- anywhere anywhere icmp fragmentation-needed ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT udp -- anywhere anywhere multiport dports http,https ACCEPT tcp -- 192.168.1.63 anywhere tcp dpt:ssh ACCEPT tcp -- 192.168.1.3 anywhere tcp dpt:ssh ACCEPT udp -- 192.168.1.26 anywhere udp dpt:snmp DROP all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination DROP all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state ESTABLISHED DROP all -- anywhere anywhere [root@Jaking ~]# iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination DNAT tcp -- anywhere 192.168.1.63 tcp dpt:http to:192.168.2.2:80 Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination SNAT all -- 192.168.2.0/24 anywhere to:192.168.1.63
感謝各位的閱讀!關于“超級實用的iptables防火墻腳本怎么用”這篇文章就分享到這里了,希望以上內容可以對大家有一定的幫助,讓大家可以學到更多知識,如果覺得文章不錯,可以把它分享出去讓更多的人看到吧!
文章名稱:超級實用的iptables防火墻腳本怎么用-創新互聯
本文網址:http://muchs.cn/article34/icose.html
成都網站建設公司_創新互聯,為您提供移動網站建設、網頁設計公司、ChatGPT、響應式網站、做網站、云服務器
聲明:本網站發布的內容(圖片、視頻和文字)以用戶投稿、用戶轉載內容為主,如果涉及侵權請盡快告知,我們將會在第一時間刪除。文章觀點不代表本網站立場,如需處理請聯系客服。電話:028-86922220;郵箱:631063699@qq.com。內容未經允許不得轉載,或轉載時需注明來源: 創新互聯
猜你還喜歡下面的內容